No More Wire Hangers!

I can’t stand wire hangers, nevertheless they still end up accumulating in my closet. The dry cleaners, garage sales and thrift store buys all tend to come with wire hangers. Die-hard recycler that I am I can’t seem to throw them away so I started looking for ways that I could use them to either make my life a little easier (as in the Bottle Dryer tip below) or craft them into something beautiful. Some of these ideas came straight from the old noggin, and some came from surfing the Internet.

Bottle Dryer

To keep water spots from forming on the inside of items with a narrow neck, tape a rag to a straightened out wire hanger and use it to dry the inside of your container.

Bubble Maker

Mix one part dishwashing liquid to two parts water in a large container. Untwist the hanger and stretch it out straight leaving one end bent. Bend the bent section back on itself to make a handle. Bend the long straight section around to make a large hoop. Dip your new bubble-maker into soap solution and wave it gently to create giant bubbles.

Camping

Straighten out one or more hangers. Leave one end curved and doubled back on itself so you have something to hold onto.  Use to roast hot dogs and marshmallows over a campfire.

Christmas Decorations

Using wire cutters cut the long piece of wire away from the curved pieces. Use pliers to shape the wire into stars, hearts, diamonds, circles … whatever shapes you want for your Christmas decorations. Decorate the wire shapes by:

  • painting
  • spray with glue, then shake on glitter
  • wrap with fabric remnants
  • wrap with ribbon, lace or string

Tie ribbons to the top of your new decorations to hang them on your tree, in a window, on a mantle …

Dream Catcher

Bend a hanger into a circle. Wrap it with ribbon or raffia. Construct a web by wrapping ribbon, yarn and/or string across the open section of the hoop. String beads and feathers onto fishing line or heavy duty thread and tie onto your new dream catcher.

Halloween Costumes

Cut, bend, twist and shape hangers into all kinds of accessories for Halloween costumes. Swords, wings, halos and horns are a just a sample of what you can shape and cover with fabric, foil or paper.

Mobile For Baby

Structure of Mobile

You’ll need two wire hangers for this one and if you want to get really creative you can add more layers and use up more hangers.

With a pair of wire cutters cut the long straight portion of each hanger at the point just above where it curves up so that you have two straight rods with a slight curve up at each end.  With a pair of pliers make a loop in the center of one of the rods. Thread the other rod through the loop and bend the loop downwards and twist so that it locks the two rods together. Now use the pliers bend the end of each rod so that it curves back onto the rod creating a closed loop and making sure that there are no sharp edges exposed.

Mobile Design

Decide what you want to hang on your mobile. You can print something onto card stock and cut it out, use small toys, whatever suits you or in the case of a true DIY’er, whatever is laying around the house. Poke a hole in whatever you’re using, thread string, ribbon or fishing line through the hole and tie to the loop at the end of each wire. Tie string, ribbon or fishing line to the center loop to use for hanging your mobile.

Plant Hanger

Cut away curved pieces from 4 hangers. Twist a small loop at the end of each wire. Thread 3 sections onto the 4th section. Wrap the straight piece that all the others pieces are strung onto around a 6″ to 8″ pot just below the lip. Thread one end of the wire through the loop at the end of this wire and then twist the wire back on itself to secure.

Wreath

Cut the straight sections away from the curved sections. Bend one or more pieces of wire into a wreath shape. If using more than one piece of wire, use pliers to make a loop at the end of one wire. Slip the other wire through the loop then make a loop at the end of the second wire and bend it over the other loop to secure. After bending into your wreath shape do the same with the other two ends to hold the wreath together. You can make a single strand wreath or multi-strand wreath (which makes it easier to attach decorations to). Use florists wire to attach holly, evergreen or vines branches to your wreath. Leave as is or continue adding other decorations such as:

  • bows
  • ribbon
  • lace
  • silk flowers and/or leaves
  • small toys

 

 

Victorian Christmas Ornament

If you’re into making your own homemade Christmas tree ornaments then this unique Christmas ornament is worthy of a true artist and yet an elementary school child can also end up with a beautiful ornament.

Note: because this easy Christmas ornament uses a glass light bulb please do not leave your child unsupervised while working on this project.

Materials:

  • burned out incandescent light bulb
  • dishwashing liquid cap
  • water or soda bottle plastic cap
  • decoupage items such as photos, magazine pictures, etc.
  • ribbon and decorative trim scraps
  • gold, silver or copper wire
  • heavy duty crafters or jewelry glue
  • metallic paint pen or metallic paint to match your wire
  • acrylic enamel paint
  • crackle medium (optional)
  • clear shellac or varnich
  • hot glue
  • old color beads of choice (1 for the bottom of ornament and 1 flat bead for the top center)
  • rubbing Alcohol or white Vinegar

Wipe the light bulb with a little rubbing alcohol or white vinegar and a piece of cotton from a vitamin or med bottle or a soft cloth. Allow to dry.

Wash bottle caps with hot soapy water and allow to dry.

Using a small nail, poke a small hole in the center of the soda cap. Bend wire into a U-shape and thread both ends through the hole in the cap. Secure the wire ends on the inside by twisting together. Now you have a hanger for your ornament.

Using heavy duty craft or jewelry glue, glue the soda cap to the socket of the light bulb and the dishwashing liquid cap to the bottom center of the bottle cap. Allow the glue to dry.

Paint the glass portion of the light bulb with enamel paint. Paint the socket section, the bottle cap and dishwashing liquid cap with a metallic paint. Allow paint to dry and apply additional coats if needed.

Glue your decoupage items to the painted light bulb.

Follow the manufacturers instructions to apply a crackle finish. When crackle finish is done apply a small amount of an antiquing medium such as burnt umber paint. Allow this to dry and then apply 2 to 3 coats clear shellac or varnish. Do not apply clear protectant to the metallic painted areas, as the varnish will dull the metallic paint.

Use hot glue to apply small pieces of decorative trim to hide the socket area and disguise the dish-washing cap.

Glue a bead to the bottom center of the ornament.

Note: you can leave the dish-washing liquid cap either open or closed. If you decide to leave it open, place a dot of glue inside the cap to keep it from closing.